CANsmart connector type and wire gauges
Gen II Connector Specifications
Sumitomo MT connector male plug
Plug – 6187-3232
Terminal – 1500-0105
Wire seal – 7160-8234
Sumitomo MT connector female receptacle
Receptacle – 6180-3242
Terminal – 1500-0110
Wire seal – 7160-8234
Gen I Connector Specifications
2-wire connectors
Male Superseal connector
Plug: TE 282104-1
Pin crimp: 282109-1
Wire seal: 281934-2
Female Superseal connector
Plug: TE 282080-1
Pin crimp: 282110-1
Wire seal: 281934-2
On all four connectors the black wire, wire number 2 is the negative ground wire and the colored wires (red, orange, yellow and white) are the positive wires.
3-wire connectors
Male Superseal connector
Plug: TE 282105-1
Pin crimp: 282109-1
Wire seal: 281934-2
Female Superseal connector
Plug: TE 282087-1
Pin crimp: 282109-1
Wire seal: 281934-2
Generation 1
- 2-wire versions:
- All output wires are 17AWG (1.0mm2)
- 3-wire versions
- High power outputs (red & orange) are 16AWG (1.5mm2)
- Low power outputs (yellow + white) are 17AWG (1.0mm2)
- Control wires for 3-wire lights (red/white and white/black) are 18AWG (0.75mm2)
Generation 2
- High power outputs (red, blue, yellow and white) are 16AWG (1.5mm2)
- Control wires for 3 wire lights are 18AWG (0.75mm2)