Clearwater Billie Brake light and gen2 CANsmart

 Billie Brake Light (BBL) has 3 wires, one black, one red, and one yellow.

BBL manual

For this example, the Yellow circuit it used as the Brake circuit. 

  1. Connect the black wire on the CANsmart to black wire on BBL in a way of your choosing. 
  2. Connect the yellow wire on CANsmart to red on BBL  in a way of your choosing. 
  3. Connect the secondary yellow wire on CANsmart to the yellow on BBL in a way of your choosing. 
  4. Integrate the BBL into the CANsmart software with the desired user settings. 
  5. Kick that side stand up and go ride. 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us